Zitat von seschei am 31. Oktober 2021, 12:16 Uhr

Ich versuche schon seit längerem den D1 mini mit der Bezeichnung "Makershop Model 8266MOD 12-F" mit der Software ESPeasy zu flashen. Ich bekomme immer eine Fehlermeldung und ich bin bisher davon ausgegangen, dass das Problem vor dem Rechner sitzt. Da ich es nicht hinbekommen habe, ist das ganze liegen geblieben. Jetzt habe ich mich aber mal wieder damit beschäftigt, neue ESPeasy-Software und Flasher heruntergeladen, mit USB verbunden, gestartet - wieder die Fehlermeldung (Log-File s. unten). Jetzt habe ich mir aus Verzweiflung mal einen D1 mini bei der Konkurrenz bestellt, mit USB verbunden, Flashvorgang gestartet, Schwups war die Software aufgespielt. Es kann also nicht am USB-Kabel liegen, an den Treibern oder an dem Problem vor dem Rechner. Die D1 minis der Konkurrenz lassen sich problemlos flashen, bei denen von Makershop.de bekomme ich das einfach nicht hin.

Gibt es irgendetwas zu beachten um die Makershop D1 minis in den Flash-Modus zu versetzen oder habe ich einfach nur die Montagsmodelle abbekommen?

######2021-10-31######
#######0.04.007#######
######FLASH INFO######
BIN file: ESP_Easy_mega_20211005_normal_ESP8266_4M1M.bin
COM port: (COM6) USB-SERIAL CH340 (Port_#0008.Hub_#0001)
Baud rate: 115200
######POST FLASH######
No post flash information entered...
######FLASH LOG######
[esptool.exe -vv -cd nodemcu -cb 115200 -cp COM6 -ca 0x00000 -cf "C:\Program Files\ESPeasy\bin\ESP_Easy_mega_20211005_normal_ESP8266_4M1M.bin"]
[31.10.2021 11:36:42] esptool v0.4.12 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
[31.10.2021 11:36:42] setting board to nodemcu
[31.10.2021 11:36:42] setting baudrate from 115200 to 115200
[31.10.2021 11:36:42] setting port from to COM6
[31.10.2021 11:36:42] setting address from 0x00000000 to 0x00000000
[31.10.2021 11:36:42] espcomm_upload_file
[31.10.2021 11:36:42] espcomm_upload_mem
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] opening bootloader
[31.10.2021 11:36:42] resetting board
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] resetting board
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] resetting board
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] trying to connect
[31.10.2021 11:36:42] flush start
[31.10.2021 11:36:42] setting serial port timeouts to 1 ms
[31.10.2021 11:36:42] setting serial port timeouts to 1000 ms
[31.10.2021 11:36:42] flush complete
[31.10.2021 11:36:42] espcomm_send_command: sending command header
[31.10.2021 11:36:42] espcomm_send_command: sending command payload
[31.10.2021 11:36:42] espcomm_send_command: receiving 2013 bytes of data
[31.10.2021 11:36:42] read 0, requested 1
[31.10.2021 11:36:42] error: failed reading byte
[31.10.2021 11:36:42] warning: espcomm_send_command: can't receive slip payload data
[31.10.2021 11:36:42] warning: espcomm_sync failed
[31.10.2021 11:36:42] error: espcomm_open failed
[31.10.2021 11:36:42] error: espcomm_upload_mem failed
[2021-10-31 11:36:42] STOPPED due to 11 errors! (try reset on the unit, then start a new flash attempt)