Forum-Navigation
Du musst Dich anmelden, bevor Du selber eine Frage oder Thema erstellen kannst.
 
Der MAKERSHOP.DE - Support versucht alle Anfragen innerhalb von 24 Stunden zu beantworten (werktags).
Bitte habe Verständnis dafür, dass wir nur Fragen zu von MAKERSHOP.DE erworbenen Produkten beantworten können.
 

ESP-Easy flashen funktioniert nicht - NodeMCU V3.4 ESP8266 ESP-12 E Lua CH340

Hallo,

ich habe das NodeMCU V3.4 ESP8266 ESP-12 E Lua CH340 Board gekauft und möchte ESP-Easy installieren.

Ich nutze Windows 10.

Ich habe den Treiber CH340 installiert und im Gerätemanager wir das Board angezeigt. (USB-SERIAL CH340 (COM 5))

Ich habe auf Github das mega-20211224-Release geladen (ESPEasy_ESP82xx_mega-20211224.zip)

Ich habe

ESP.Easy.Flasher.exe gestartet aber unter COM port wird das Modul nicht angezeigt.

COM-Ports habe ich im Gerätemanager mehrere ausprobiert.

Das ganze habe ich auf zwei unterschiedlichen PC gemacht.

Zuvor war das Modul unter COM port angezeigt, jedoch ist das Flashen fehlgeschlagen.

Ausgewählt habe ich vorher: ESP_Easy_mega_20211224_normal_ESP8266_4M1M.bin.

 

Bitte um Tipps zur Fehlersuche.

 

Viele Grüße

Bbask

 

 

Logfile:

 

######2022-03-07######
#######0.04.007#######
######FLASH INFO######
BIN file: ESP_Easy_mega_20211224_normal_ESP8266_4M1M.bin
COM port: (COM4) USB-SERIAL CH340 (Port_#0002.Hub_#0003) [online]
Baud rate: 115200
######POST FLASH######
No post flash information entered...
######FLASH LOG######
[esptool.exe -vv -cd nodemcu -cb 115200 -cp COM4 -ca 0x00000 -cf "D:\Eigene Dateien\02 Downloads\ESPEasy_ESP82xx_mega-20211224\bin\ESP_Easy_mega_20211224_normal_ESP8266_4M1M.bin"]
[07.03.2022 12:28:11] esptool v0.4.12 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
[07.03.2022 12:28:11] setting board to nodemcu
[07.03.2022 12:28:11] setting baudrate from 115200 to 115200
[07.03.2022 12:28:11] setting port from to COM4
[07.03.2022 12:28:11] setting address from 0x00000000 to 0x00000000
[07.03.2022 12:28:11] espcomm_upload_file
[07.03.2022 12:28:11] espcomm_upload_mem
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] opening bootloader
[07.03.2022 12:28:11] resetting board
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] resetting board
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] resetting board
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] trying to connect
[07.03.2022 12:28:11] flush start
[07.03.2022 12:28:11] setting serial port timeouts to 1 ms
[07.03.2022 12:28:11] setting serial port timeouts to 1000 ms
[07.03.2022 12:28:11] flush complete
[07.03.2022 12:28:11] espcomm_send_command: sending command header
[07.03.2022 12:28:11] espcomm_send_command: sending command payload
[07.03.2022 12:28:11] serialport_receive_C0: 00 instead of C0
[07.03.2022 12:28:11] warning: espcomm_sync failed
[07.03.2022 12:28:11] error: espcomm_open failed
[07.03.2022 12:28:11] error: espcomm_upload_mem failed
[2022-03-07 12:28:11] STOPPED due to 2 errors! (try reset on the unit, then start a new flash attempt)